Benefits and Features

  • Outstanding anti-wear performance
  • Enhanced corrosion protection
  • Excellent filterability
  • Good oxidation resistance
  • Superb anti-foam properties
  • Excellent hydrolytic stability
Nulon - ISO 68 Hydraulic Fluid - 5 Litre Bottle - 3 per cartonNulon - ISO 68 Hydraulic Fluid - 20 Litre Drum - Single Unit

ISO 68 Hydraulic Fluid

Nulon ISO 68 Hydraulic Fluid is suitable for a multitude of hydraulic systems. The unique blend maintains optimum viscosity characteristics over a wide temperature, operating pressures and speeds range making it suitable for stationary and mobile hydraulic systems.

Nulon ISO 68 Hydraulic Fluid is blended with a high quality hydro-cracked mineral base fluid and the latest high performance, thermally stable zinc anti-wear additives, along with anti-foam, anti-corrosion and oxidation inhibitors for sustained performance and protection.

The unique high stable zinc anti-wear additive reduces wear on components and protects working surfaces thus reducing equipment down time. The anti-corrosion additives protect the hydraulic system against rust formation due to water contamination or moisture absorption. This coupled with the oxidation inhibitors prevent the formation of harmful sludge, reduces varnish and oil thickening.

Benefits and Features

  • Outstanding anti-wear performance
  • Enhanced corrosion protection
  • Excellent filterability
  • Good oxidation resistance
  • Superb anti-foam properties
  • Excellent hydrolytic stability

Market Applications

  • Earthmoving, construction and industrial equipment
  • Truck hoists
  • Ancillary hydraulic power take-off equipment
  • Forklifts

Applications

Suitable for use in the following manufacturers:

  • Amman (Rammax)
  • Case
  • Daewoo
  • Ditch Witch
  • Dynapac
  • Fiat-Allis
  • Hanomag
  • Hyundai
  • Inggersoll-Rand
  • International
  • John Deere
  • Kato
  • Kawasaki
  • Kobelco
  • Kunuta
  • Mitsubishi
  • Sakai
  • Takeuchi
  • TCM

Typical Characteristics:

ISO 32 46 68
KV @ 40°C (cSt) 30.63 47.08 68.57
KV @ 100°C (cSt) 5.349 7.153 9.135
Viscosity Index, ASTM D 2270 108 111 109
Density @ 15°C kg/L 0.8600 0.8637 0.8670
Air Release, minutes, IP313 3.30 3.60 4.30
Copper Corrosion @ 100°C, 3 hours, D130 1a 1a 1a
Pour Point, °C, ASTM D 97 -18 -18 -21
Rust Preventing Characteristics D665, Procedure B Nil Nil Nil
Zinc content, Mass% 0.03 0.03 0.03

Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification.

Approvals and Specifications:

Suitable for use where the following specifications are required:

  • Denison HF-0, HF-1, HF-2
  • Eaton Vickers M-2950-S, I-286-S
  • Cincinnati Machine (Milacron) P-68, P-69, P-70
  • U.S. Steel 127, 136
  • DIN 51524 part 2 and 3

Note: Refer to equipment manufacturer’s lubrication recommendation to confirm if this product is suitable for the intended application.

Health and Safety:

Avoid skin contact with used oils. Wear suitable gloves. If skin contact occurs wash immediately with soap and water.
Protect the environment. Do not pollute drains, ground, or water with waste oil. Dispose of waste oil and container as per local regulations. Do not use container for fuel or solvents.

^ Back to Top