Search Our Website:
Nulon Products Australia
::Products -> Cooling Systems-> Ultra Cool 70 Plus
Cooling Systems

Ultra Cool 70 Plus

Download PDF Product Bulletin for Ultra Cool 70 Plus Print Product Bulletin for Ultra Cool 70 Plus
Ultra Cool 70 PlusPart No:UC70P

Nulon Ultra Cool 70 Plus is a ready-mix 33% mix radiator coolant with demineralised water. It is formulated with corrosion inhibitor and additional glycol protection. The extra 70g/L glycol helps to reduce boiling corrosion experienced with older vehicles that uses type B coolant.

Nulon Ultra Cool 70 Plus is a ready-mix 33% mix radiator coolant with demineralised water. It is formulated with corrosion inhibitor and additional glycol protection. The extra 70g/L glycol helps to reduce boiling corrosion experienced with older vehicles that uses type B coolant. It is designed for general purpose vehicles requiring type B coolant and designed to meet the demands of everyday passenger cars under light to normal driving conditions.

The use of tap water is not recommended for automotive cooling system. Chlorine is usually added to tap water in order to kills bacteria and safe for drinking however this addition is found to be corrosive in cooling system. Tap water contains minerals that can cause scaling when used in the cooling system. These are reasons why Nulon Ultra Cool 70 Plus (UC70P) is diluted with demineralised water and ready to use.

However, if a vehicle manufacturer particularly specifies the use of anti-freeze/anti-boil it is essential to use the specified product as some engines suffer from localised "hot spot" boiling. Nulon Ultra Cool 70 Plus is suitable for use in the cooling systems of all vehicles that do not specify antifreeze/ anti-boil coolant. Nulon Ultra Cool 70 Plus meets AS 2108-2004 Type B.

Benefits:

  • Complete fill – no pre-mixing required
  • Provides protection for up to 3 years or 60,000 km
  • Contains 70 grams per litre of ethylene glycol
  • Increased corrosion protection
  • Harmless to hoses and seals

Nulon Ultra Cool 70 Plus is suitable for use in the cooling systems of all passenger cars that require a Type B coolant.

Directions for Use:
Flush cooling system with clean water. NOTE: If the cooling system is dirty or rusty, first clean with Nulon Radiator Flush and Clean (R40). Drain all fluid from the radiator, engine block and heater core. Completely fill the system with Nulon Ultra Cool 70 Plus. Do not add water. Run the engine and turn the heater ON to maximum. Re-check level when the engine is cool. Top up when necessary. Replace Nulon Ultra Cool 70 Plus every 3 years or 60,000 km, whichever occurs first. Do not mix with any other coolant. If spilled on paintwork, wash off with water immediately.

Warning:
Under no circumstances mix radiator products of different brands, and never under-treat with radiator products. Where Nulon Ultra Cool 70 Plus (UC70P) is used as top up with other brands of coolant, perform complete coolant change within the next 2,500km for continuous protection.

First Aid:
Do not swallow. For advice, please contact a Poisons Information Centre (Phone eg Australia 131126, New Zealand 0800 764 766) or a doctor (at once). If swallowed, DO NOT induce vomiting. Not to be used as a food container. To protect the environment, dispose of used coolant in a safe manner or as advised by the Environmental Protection Agency.

Packaging:

5 litre bottles (3 bottles per carton)

Part No. UC70P-5

 

  • Images


    UC70P JPG (47kb)
Save Fuel Tips