Full Synthetic 5W-20 Fuel Conserving Engine Oil (SYN5W20)

Nulon Full Synthetic 5W-20 Fuel Conserving Engine Oil is designed to provide the ultimate protection for all new-generation passenger car and light commercial petrol engines that require an ultra-low viscosity 5W-20 engine oil. Specifically formulated to provide optimum fuel economy while maintaining a high level of engine protection during long oil drain intervals and cold start-up.

Recommended for use in both turbocharged and non-turbocharged petrol engines.

Meets ILSAC GF-5 energy conserving requirements and delivers greater fuel economy and engine protection. Additional anti-wear additives provide maximum performance and protection to engine and turbocharger components, while enhanced corrosion protection provides bio-fuel compatibility for vehicles using E10 and E85 fuels.

Nulon Full Synthetic 5W-20 Fuel Conserving Engine Oil has added Molybdenum Dithiocarbamate to give you additional high-level wear protection and performance. Molybdenum Dithiocarbamate is proven to dramatically reduce friction and provide increased engine wear protection from cold start to extreme temperatures, giving you added benefits over standard engine oil alone.

Benefits

  • Ultra low viscosity fuel efficient formula
  • Added Molybdenum Dithiocarbamate provides more protection and performance over engine oil alone
  • Provides excellent cold startup protection
  • Ultrafast flowing formula
  • Provides excellent engine cleanliness
  • Provides excellent oxidation control and thermal stability
  • Oil stays in-spec during long drain intervals

NOTE: Not recommended for heavy-duty diesel engines. Refer to your vehicle service manual for correct lubricant requirements and service intervals.

Download MSDS Download Product Bulletin
Typical Characteristics
SAE Viscosity Grade 5W-20
Viscosity @ 100°C (cSt)  ASTM D445 8.860
Viscosity @ 40°C (cSt)  ASTM D445 53.47
Apparent Viscosity by CCS @ -30°C (cP) ASTM 5293 6040
Apparent Viscosity by MRV @ -35°C (cP) ASTM 4684 19400
Viscosity Index  ASTM D2270 145
Density @ 15°C (kg/L)  ASTM D4052 0.8542
Sulphated Ash (mass %)  ASTM D874 0.9
Total Base Number (mg KOH/g)  ASTM D2896 7.5
Flash Point (°C)  ASTM D92 225

Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification.

Caution

CAUTION:  Avoid skin contact with used oil. Wear suitable gloves. If skin contact occurs, wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect the environment. Do not pollute drains, ground or water with used oil. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.

Specifcations
Meets or exceeds the following oil industry specifications
American Petroleum Institute
API SN API SM API SL API SJ API SG
Blend Type
Full Synthetic
Compatible Fuels
E85 LPG Petrol
Ford
Ford WSS M2C 945A
ILSAC
ILSAC GF-5
Moly DTC
Contains Moly DTc
Society of Automotive Engineers
SAE 5W-20

Suitable for use in the following manufacturers

Chrysler Dodge Ford Honda Hyundai Jaguar Kia Land Rover Lexus Mazda Subaru Suzuki Toyota