Premium Mineral 10W-30 Fast Flowing Engine Oil (PM10W30)
|SAE Viscosity Grade||10W-30|
|Viscosity @ 100°C (cSt) ASTM D445||11.53|
|Viscosity @ 40°C (cSt) ASTM D445||79.05|
|Apparent Viscosity by CCS @ -25°C (cP) ASTM D5293||6180|
|Apparent Viscosity by MRV @ -30°C (cP) ASTM D4684||33700|
|Viscosity Index ASTM D2270||138|
|Density @ 15°C (kg/L) ASTM D4052||0.8684|
|Sulphated Ash (mass %) ASTM D874||0.7|
|Total Base Number (mg KOH/g) ASTM D2896||6.6|
|Flash Point (°C) ASTM D92||228|
Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification.
NOTE: Not recommended for heavy-duty diesel engines. Refer to your vehicle service manual for correct lubricant requirements and service intervals.
CAUTION: Avoid skin contact with used oil. Wear suitable gloves. If skin contact occurs, wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect the environment. Do not pollute drains, ground or water with used oil. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.