Xtreme Performance Brake Fluid - Super DOT 4

Xtreme Performance Brake Fluid - Super DOT 4

Nulon Xtreme Performance Brake Fluid (XBF) is a high-performance borate ester brake fluid (Super DOT 4) which optimises the benefits of superior boiling point and high vapour lock temperature throughout its service life.

Nulon XBF is compatible with all metals and rubber seals typically used in automotive braking systems. It is intended for use both as initial fill and in aftercare markets. Nulon XBF is manufactured as a clear amber coloured fluid. It is suitable for all disc, drum, anti-skid ABS braking and electronic stability control systems used in standard to high performance vehicles with high thermal load around the braking system.


Service Life

Nulon XBF should be changed every 24 months under standard driving conditions in order to maintain protection against vapour lock and corrosion.


Nulon XBF is only compatible with brake fluids that meet the DOT 4 or Super DOT 4 brake fluid specifications.

Useful Information

Nulon XBF contains inhibitors to reduce corrosion of the many alloys components found in braking systems. Oxidation inhibitors are also used to prevent the oxidation process of the fluid.

Nulon XBF has no adverse effect on the physical properties of the rubber cups and O rings used in the master and wheel cylinders.

Equilibrium reflux boiling point (ERBP) is the average temperature of a fluid boiling under equilibrium conditions (reflux) at atmospheric conditions. High performance brake fluids such as Nulon XBF must have a high enough boiling point (ERBP) to resist vapour lock under severe braking conditions. Note that the boiling point of the brake fluid will deteriorate significantly with moisture adsorption. With use, brake fluid absorbs water from the atmosphere and reduces the ERBP.

It is difficult to completely seal the braking system to prevent the ingress of atmospheric moisture or water splashes through hoses and the master cylinder. Brake fluids must withstand the absorption of at least 3% to 4% water without lowering the boiling point to a dangerous level. The presence of more free water significantly increases the chance of brake failure due to vapour lock and can promote corrosion of the brake system. This is why it is so critical to change the fluid every two years.

International and National Standards

Nulon XBF exceeds the requirements of

  • FMVSS 116 (DOT 4)
  • ISO 4925
  • GMH HN 1796
  • FORD ESZ-M6C55-A
  • AS 1960.1-2005 (Grade 3)
  • SAE J1704
Typical Properties
Test Result
pH 7.6
Reserve alkalinity (ml) 5.9
Flash point (open cup), ºC 156
Density @ 20ºC (g/ml) 1.074
Soluble In water Miscible

Key Properties

Property Typical Result AS 1960.1 (Grade 3) SAE J1704 FMVSS No.116 (Dot 4) ISO 4925
Equilibrium Reflux Boiling Point (ERBP), °C min 284 260 230 230 205
Wet Equilibrium Reflux Boiling Point (WERBP), °C min 183 170 155 155 140
Viscosity (-40°C) mm²/s max


Viscosity (100°C) mm²/s min 2.5 1.5 1.5 1.5 1.5

Safety Directions: Avoid contact with skin and eyes.

First Aid Instructions: If poisoning occurs, contact a doctor or Poisons Information Centre (Ph. Australia 131 126; New Zealand 0800 764 766). If swallowed, give plenty of water to drink and seek medical assistance. If in eyes, hold the eyes open, flood with water for at least 15 minutes and consult a doctor. Wash contaminated skin. If irritation occurs, seek medical advice. Not to be used as a food container.

Caution: Do not spill on paintwork. If fluid is spilt on paintwork, do not wipe off, wash off immediately with water.

Contamination of brake fluid or brake components with petroleum, oil, water, dirt, silicon fluids or other fluids may result in brake failure. Maintain cleanliness when handling brake components and dispensing equipment. Brake fluid absorbs moisture. Reseal all containers with caps immediately. Discard resealed containers after 12 months of opening. Do not re-use empty containers.

How our customers rate this product.

Be the first to review this product...


Frequently Asked Questions

What is the difference between DOT3 and SUPER DOT4 brake fluid?

4 years ago

SUPER DOT4 has a higher boiling point than DOT3 brake fluid and is used in many modern vehicles. Use the Nulon Lube Guide (mobile) to select the correct fluid for your car.

4 of 8 people found this helpful
Help Us Help You
Was this helpful to you?     Yes No

Why does brake fluid need to be replaced every two years?

4 years ago

Brake fluid is designed to absorb and retain moisture. Moisture can enter a brake caliper when driving on a wet road and it is important that this moisture does not pool and cause rust etc. Brake fluid holds this moisture in suspension so it can be removed by brake bleeding with new fluid. Follow your vehicle manufatcurers guidelines on brake fluid replacement inetrvals.

2 of 2 people found this helpful
Help Us Help You
Was this helpful to you?     Yes No

What brake fluid should I use in my car?

4 years ago

Nulon gives brake fluid recommendations on the on-line Lube Guide.  

0 of 9 people found this helpful
Help Us Help You
Was this helpful to you?     Yes No

Related Questions

How do I check and top-up Brake Fluid?

3 years ago

Nulon shows you how to check and top-up your vehicle's brake fluid in an easy step by step process.

All you need to do this:  Rags, Gloves and the correct Brake Fluid


2 of 2 people found this helpful
Was this helpful to you?     Yes No
View more F.A.Q.s
Can't find an answer to your Question?