Worn Engine Repair

Worn Engine Repair

Nulon Worn Engine Repair with PTFE reduces oil consumption, helps restore cylinder compression and promotes a quieter smoother engine. The protective shield created by PTFE extends the life of worn petrol, diesel turbo and LPG engines. Use Worn Engine Repair with every oil change to enhance the protection oil alone provides.

NOTE: Worn Engine Repair can be used with any type of engine oil.


  • Reduces engine wear
  • Extends engine life
  • Reduces valve lifter noise
  • Reduces oil consumption
  • Will not affect oil viscosity
  • Helps restore cylinder compression
  • Promotes a quieter, smoother engine
  • Compatible with mineral & synthetic petrol & diesel oils

1 bottle treats up to 6 litres of oil. Shake bottle and add contents to engine oil. Idle engine for at least 1 minute. Use with every oil change.

Application rates

Car & truck engines - 1 bottle per 6 litres of engine oil

4 stroke motorcycles - 50 ml per litre of oil (safe with wet clutches)

NOTE: For diesel engines, use a Nulon diesel engine treatment.

For advice, contact a Poisons Information Centre (Phone e.g. Australia 131 126; New Zealand 0800 764 766) or a doctor (at once).

Tests ASTM Nulon E10
Colour Visual Green
Flash point, COC, °C D92 198
Foam characteristics D892 Nil foam
Viscosity @ 40 °C, cSt D445 58.71
Viscosity @ 100 °C, cSt D445 8.390
Viscosity index D2270 114
Density, Kg/L D1298 0.9205
Pour point , °C D97 -15
Melting point of PTFE, °C D1457 >325

How our customers rate this product.

Average rating of


1 customer review

5 Star
4 Star
3 Star
2 Star
1 Star

Most Helpful Customer Reviews

4 of 4 people found the following review helpful
5/ 5stars
Feedback: Worn Engine Treatment , 22 May 2016 By DickTurbo
This is a big hello from the UK, I have just used Nulon Worn Engine Treatment in my 1992 Ford Sierra 2.0 injection dohc estate car , that has been owned by our family since new. We know its service history and we have looked after it very well. It has now done in excess of 160,000 miles and was starting to exhibit noisy start ups i.e general noise /rattling for the first 15-20 seconds, before the oil was fully circulated. . I used a good quality fully synthetic oil on the last oil change and this helped a bit , but on the recent change, I used the same synthetic and also added the Nulon worn engine treatment as well. This combination proved fantastic and the start up noise has disappeared..This engine has a cam chain and hydraulic tensioner plus guides and I believe this worn chain system was the source of the noise that the Nulon has quietened down. Very impressive indeed. I wish we could still get Nulon in the UK as this was my one and only bottle that I purchased on ebay some years ago and previously had never got round to using. You good people in Australia are very lucky to have access to such an excellent product DickTurbo
Was this review helpful to you?     Yes No
4 of 4 people found this helpful


Frequently Asked Questions

Do I add Nulon Engine Treatments to my old engine oil or new engine oil

4 years ago

Nulon ani-wear Engine Treatments based on PTFE can be added to engine oil at any time but are best added to new engine oil after an oil change. Please follow directions of use for the Nulon Engine Treatment products to ensure your engine receivesthe best possible protection from wear and friction.

28 of 29 people found this helpful
Help Us Help You
Was this helpful to you?     Yes No

How often should I use Nulon engine treatments ?

4 years ago

Worn Engine Repair,Modern Engine Treatment and Passenger Car Diesel Engine Treatment are recommended at each oil change. For extra protection use Pro-Strength Extreme Performance Engine Treatment (petrol) and Pro-Strength Heavy Duty Diesel Engine Treatment (diesel)

28 of 33 people found this helpful
Help Us Help You
Was this helpful to you?     Yes No

Does Nulon have an engine treatment to stop oil leaking from my engine ?

4 years ago

Yes, Nulon engine treatments (Worn Engine Repair,Modern Engine Treatment ,Pro-Strength Extreme Performance Engine Treatment,Passenger Car Diesel Engine Treatment, Pro-Strength Heavy Duty Diesel Engine Treatment etc) will reduce cylinder blowby and reduce crankcase pressures. Engine Stop Leak will also rejuvinate hardened oil seals

16 of 19 people found this helpful
Help Us Help You
Was this helpful to you?     Yes No

What Nulon engine treatment suits my vehicle ?

4 years ago

This depends to the fuel type (petrol or diesel) and also the age and mileage on the vehicle. Worn Engine Repair for high mileage engines with some wear, Modern Engine Treatment for engines in good condition, Pro-Strength Extreme Performance Engine Treatment as a long term treatment. Small capacity diesel engines should use Passenger Car Diesel Engine Treatment, while for larger diesel engines use Pro-Strength Heavy Duty Diesel Engine Treatment.

14 of 20 people found this helpful
Help Us Help You
Was this helpful to you?     Yes No

Related Questions

Do engine treatments extend the life of my oil?

4 years ago

No, oil changes should still occur at the intervals set by the vehicle manufacturer.

27 of 28 people found this helpful
Was this helpful to you?     Yes No

If I use two bottles will it work faster or give a better result ?

4 years ago

No, all engine treatment products should only be used as per dosage recommendations as per directions. We would also recommend to not use more than one additive in an engine at one time.

24 of 25 people found this helpful
Was this helpful to you?     Yes No

Do engine treatments affect synthetic oils ?

4 years ago

No, all Nulon engine treatments are compatable with synthetic and mineral oils

37 of 41 people found this helpful
Was this helpful to you?     Yes No

Can I add more than one Nulon product to my engine?

4 years ago

It is recommended to only use one Nulon engine product at each oil change.

13 of 13 people found this helpful
Was this helpful to you?     Yes No

My engine is using a lot of oil, should I run a thicker oil to reduce this consumption?

4 years ago

Running a very thick oil can sometimes cause issues in modern engines. An area that is often overlooked when oil comsumption is a problem is hardened valve stem seals. Oil will bypass hardened seals and allow oil into the combustion chamber via the valve stems. Consumption as high as one litre per thousand kms can be caused by valve stem seal leakage. Nulon Engine Stop Leak can rejuvenate hardened valve stem seals and should be used before moving to a thicker engine oil.

19 of 20 people found this helpful
Was this helpful to you?     Yes No

What if I accidently place a fuel treatment in my engine oil?

4 years ago

It will dilute the engine oil, effecting its viscosity and ability to protect vital components. We recommend replacing engine oil and filter before driving.

19 of 21 people found this helpful
Was this helpful to you?     Yes No
View more F.A.Q.s
Can't find an answer to your Question?