Hero image

Full Synthetic 15W-50 Street and Track High Performance Engine Oil

Nulon Full Synthetic 15W-50 Street & Track High Performance Engine Oil is formulated specifically to satisfy the needs of the enthusiast who wants high protection for their high-performance V8 (including large bore), 6 and 4 cylinder engines. Nulon Full Synthetic 15W-50 Street & Track High Performance Engine Oil provides the benefits of a full synthetic lubricant to engines that perform better on high viscosity engine oil.

Check the lubeguide

Nulon Full Synthetic 15W-50 Street & Track High Performance Engine Oil is recommended for use in high-performance V8 (including large bore), 6 and 4 cylinder engines, where the added protection of a high viscosity oil is required. Enhanced protection for vehicles using E10, E85 and LPG fuels.

Nulon Full Synthetic 15W-50 Street & Track High Performance Engine Oil has added Molybdenum Dithiocarbamate (Moly DTC) to give you additional peace of mind performance. Moly DTC is proven to dramatically reduce friction and provide increased engine wear protection from cold start to extreme temperatures, giving you additional benefits over standard engine oil additives alone. For further information go to www.lessfriction.com.au

Benefits

  • Ultimate engine protection for high-performance engines during hard street and track driving.
  • Higher viscosity shear stable formula for ultimate high-temperature stability.
  • For petrol, diesel and LPG engines with 4, 6 and 8 cylinders.
  • Enhanced protection for vehicles using E10, E85 and LPG fuels.
  • Premium anti-oxidant formula.
  • 15W-50 viscosity provides improved oil film strength.
  • Added Molybdenum Dithiocarbamate provides more protection and performance over standard engine oil alone. 
  • Perfect for street or race track use

NOTE Not recommended for heavy-duty diesel engines. Refer to your vehicle service manual for correct lubricant requirements and service intervals. 

Typical Characteristics

SAE Viscosity Grade 15W-50
Viscosity @ 100°C (cSt)  ASTM D445 18.92
Viscosity @ 40°C (cSt)  ASTM D445 132.5
Apparent Viscosity by CCS @ -20°C (cP) ASTM D5293 3180
Apparent Viscosity by MRV @ -25°C (cP) ASTM D4684 16400
Viscosity Index  ASTM D2270 162
Density @ 15°C (kg/L)  ASTM D4052 0.8613
Sulphated Ash (mass %)  ASTM D874 1.0
Total Base Number (mg KOH/g)  ASTM D2896 9.5
Flash Point (°C)  ASTM D92 230

Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification.

Caution

CAUTION  Avoid skin contact with used oil. Wear suitable gloves. If skin contact occurs, wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect the environment. Do not pollute drains, ground or water with used oil. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.

How our customers rate this product.

Be the first to review this product...

FAQs

What is Moly DTC?

Nulon engine oils contain Moly DTC. This unique, state of the art, engine oil additive offers huge reductions in friction to provide improved fuel economy and provide optimum wear protection.

 

22 of 25 people found this helpful
Help Us Help You
Was this helpful to you?     Yes No

Related Questions

Synthetic base oils have a number of advantages over mineral base oils. The uniformity of the synthetic oil molecules improves the thermal stability and reduces oxidation of the oil. Controlled molecular structure also results in lower volatility and a more stable vicosity over the life of the oil.

165 of 170 people found this helpful
Was this helpful to you?     Yes No

Most diesel engine oils carry a higher specification rating than petrol engine oils and vehicle manufacturers often specify a diesel engine oil be used in a petrol motor. This does not work in the reverse, petrol only engine oils cannot be used in diesels. Some engine oils carry both petrol and diesel specifications.

176 of 182 people found this helpful
Was this helpful to you?     Yes No

All engine oils contain detergent and dispersant additives which remove contaminant build-up inside your engine. When new oil is added to an engine these additives strip away build-up and hold the contaminant in suspension so it can be removed when the oil is drained, this does discolour the oil.

61 of 64 people found this helpful
Was this helpful to you?     Yes No

SAE is the Society Of Automotive Engineers (USA). The SAE rating of an oil is a measure of its viscosity (eg 20W50).

API is the American Petroleum Institute. The API rating of an engine oil covers the performance rating of the oil (e.g. SM for petrol, CF for diesel).

ACEA is a European industry body up of European vehicle manufacturers. The ACEA rating of an engine oil of covers the performance rating of the oil (e.g. A3/B3, C3).

62 of 69 people found this helpful
Was this helpful to you?     Yes No

No, all Nulon engine treatments are compatable with synthetic and mineral oils

40 of 44 people found this helpful
Was this helpful to you?     Yes No

Contact your local waste facilities or environmental protection agency. Used coolants can contain environmentally unfriendly materials that have originated from the engine cooling system and need appropriate disposal. Do not drain used coolant onto the ground or into storm water.

15 of 16 people found this helpful
Was this helpful to you?     Yes No

How to change your Engine Oil
We show you how to change your vehicle's engine oil in an easy step by step process. 

 


All you need to do this is, car jack, jack stands or ramps, socket or spanner, drain plug washer,  oil filter wrench, oil drain pan, some rags, container for the used oil, some gloves, a new oil filter  and Some Nulon Engine Oil.

18 of 20 people found this helpful
Was this helpful to you?     Yes No

Nulon provide lubricant recommendations in their on-line Lube Guide. (mobile version)

39 of 52 people found this helpful
Was this helpful to you?     Yes No

Engine, gearbox, and transmission oils are blended from base oils. These base oils are categorised into Groups by the API Base Oil Classification system. If the automotive field Group III and Group IV base oils are marketed as synthetic.

17 of 21 people found this helpful
Was this helpful to you?     Yes No

Nulon engine treatments can be used in used in four stroke boat and four stroke motorbike engines but at appropriate dosage rates (see labels for details)

17 of 21 people found this helpful
Was this helpful to you?     Yes No

Follow the vehicle manufacturers guidelines. Use an oil that meets there required specification and follow the vehicle manufacturer recommendation on oil change intervals. The interval can vary depending on driving and climate conditions.

32 of 44 people found this helpful
Was this helpful to you?     Yes No

All engine oils contain zinc, but in varying amounts.

31 of 50 people found this helpful
Was this helpful to you?     Yes No
View more F.A.Q.s
Can't find an answer to your Question?