Hero image

Premium Mineral 15W-40 Everyday Engine Oil

Nulon Premium Mineral 15W-40 Everyday Engine Oil is formulated with virgin mineral base oils and high-performance additives which provide optimum performance and protection to most late model engines.

Check the lubeguide

Nulon Premium Mineral 15W-40 Everyday Engine Oil is formulated with virgin mineral base oils and high-performance additives which provide optimum performance and protection to most late model engines.

Nulon Premium Mineral 15W-40 Everyday Engine Oil promotes easier cold starting, reduces wear and keeps the engine clean between the recommended oil drain intervals.

For increased performance and protection use Nulon Semi Synthetic 15W-40 Modern Everyday Engine Oil (Part No. ME15W40).

Benefits

  • Maintains viscosity at high temperature
  • Anti-wear protection to extend the life of the engine
  • Enhanced detergency to clean and prevent sludge formation
  • Contains anti-oxidants to prolong the life of the oil between drain intervals
  • Faster oil flow improves cold starting
  • Safe for catalytic converters
  • Suitable as a running-in oil

Typical Characteristics

SAE Viscosity Grade 15W-40
Viscosity @ 100°C (cSt)  ASTM D445 15.09
Viscosity @ 40°C (cSt)  ASTM D445 121.6
Apparent Viscosity by CCS @ -20°C (cP) ASTM D5293 5950
Apparent Viscosity by MRV @ -25°C (cP) ASTM D4684 24700
Viscosity Index  ASTM D2270 128
Density @ 15°C (kg/L)  ASTM D4052 0.8753
Sulphated Ash (mass %)  ASTM D874 0.8
Total Base Number (mg KOH/g)  ASTM D2896 6
Flash Point (°C)  ASTM D92 227

Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification.

Warnings

NOTE: Not recommended for heavy-duty diesel engines. Refer to your vehicle service manual for correct lubricant requirements and service intervals.

CAUTION:  Avoid skin contact with used oil. Wear suitable gloves. If skin contact occurs, wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect  the environment. Do not pollute drains, ground or water with used oil. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.

Specifications

Meets or exceeds the following oil industry specifications

Specification GroupsSpecifications
American Petroleum Institute
API SL , API SJ , API SH , API SG , API CF
Blend Type
Mineral
Compatible Fuels
Petrol , Light duty diesel
Society of Automotive Engineers
SAE 15W-40

How our customers rate this product.

Be the first to review this product...

FAQs

Related Questions

Synthetic base oils have a number of advantages over mineral base oils. The uniformity of the synthetic oil molecules improves the thermal stability and reduces oxidation of the oil. Controlled molecular structure also results in lower volatility and a more stable vicosity over the life of the oil.

165 of 170 people found this helpful
Was this helpful to you?     Yes No

Most diesel engine oils carry a higher specification rating than petrol engine oils and vehicle manufacturers often specify a diesel engine oil be used in a petrol motor. This does not work in the reverse, petrol only engine oils cannot be used in diesels. Some engine oils carry both petrol and diesel specifications.

176 of 182 people found this helpful
Was this helpful to you?     Yes No

All engine oils contain detergent and dispersant additives which remove contaminant build-up inside your engine. When new oil is added to an engine these additives strip away build-up and hold the contaminant in suspension so it can be removed when the oil is drained, this does discolour the oil.

61 of 64 people found this helpful
Was this helpful to you?     Yes No

SAE is the Society Of Automotive Engineers (USA). The SAE rating of an oil is a measure of its viscosity (eg 20W50).

API is the American Petroleum Institute. The API rating of an engine oil covers the performance rating of the oil (e.g. SM for petrol, CF for diesel).

ACEA is a European industry body up of European vehicle manufacturers. The ACEA rating of an engine oil of covers the performance rating of the oil (e.g. A3/B3, C3).

61 of 68 people found this helpful
Was this helpful to you?     Yes No

Contact your local waste facilities or environmental protection agency. Used coolants can contain environmentally unfriendly materials that have originated from the engine cooling system and need appropriate disposal. Do not drain used coolant onto the ground or into storm water.

15 of 16 people found this helpful
Was this helpful to you?     Yes No

How to change your Engine Oil
We show you how to change your vehicle's engine oil in an easy step by step process. 

 


All you need to do this is, car jack, jack stands or ramps, socket or spanner, drain plug washer,  oil filter wrench, oil drain pan, some rags, container for the used oil, some gloves, a new oil filter  and Some Nulon Engine Oil.

18 of 20 people found this helpful
Was this helpful to you?     Yes No

Nulon provide lubricant recommendations in their on-line Lube Guide. (mobile version)

39 of 52 people found this helpful
Was this helpful to you?     Yes No

Follow the vehicle manufacturers guidelines. Use an oil that meets there required specification and follow the vehicle manufacturer recommendation on oil change intervals. The interval can vary depending on driving and climate conditions.

32 of 44 people found this helpful
Was this helpful to you?     Yes No

All engine oils contain zinc, but in varying amounts.

30 of 49 people found this helpful
Was this helpful to you?     Yes No

Can't find an answer to your Question?