Hero image

Anti Seize Xtreme Pressure Anti-Seize Lubricant (L90)

The best grease in the world? - we think it is. Nulon Anti Seize Xtreme Pressure Anti-Seize Lubricant (L90) is a complex bentone-based grease containing a high percentage of polytetrafluoroethylene (PTFE). L90 offers extremely high film strength and adhesion to protect moving parts against friction, wear and seizure in all types of extreme conditions. 

Nulon Anti Seize Xtreme Pressure Anti-Seize Lubricant (L90) is a complex bentone based lubricating paste containing a high percentage of polytetrafluoroethylene (PTFE). Nulon L90 provides extremely high film strength and adhesion, protecting against initial start-up damage of machinery even after long periods of lay-up. Nulon L90 provides long-term lubrication of components that are otherwise difficult or impossible to lubricate after initial assembly. Most chemicals, solvents and corrosive agents do not affect Nulon L90. L90 does not dry or harden with age and offers performance over a wide temperature range. L90 protects exposed components against rust during lay-up. L90 permits more even torque pressures and faster breakouts of threads, joints, flanges and gaskets.

Benefits

  • Minimises initial start-up damage
  • Seals gasket surfaces without adhering
  • Seals threads up to 8mm diameter
  • Reduces possibility of seizing
  • Reduces wear and friction
  • Protects against corrosion
  • Resists water wash out
  • Offers a high degree of residual lubrication

Typical Applications

Applications for L90 are limited only by the user's imagination. The following are only indicative of the potential applications for L90.

Engine Assembly

  • Camshafts and followers
  • All bearing surfaces
  • Shoulders of head studs
  • Threads (particularly those to be torqued)
  • Valve stems and seals
  • Oil seals
  • Gasket surfaces

General Automotive

  • Propeller shaft spline
  • Ignition points rubbing blocks
  • Anti-squeal for brake pads
  • Assembly of differentials
  • Hinge pins
  • Door locks
  • Assembly of gearboxes
  • Prime mover turntables

Marine

  • Cables
  • Winches
  • Pump assemblies
  • Steering stems and cables
  • Propeller shafts
  • Seals

Agriculture

  • Exposed chains and gears
  • Splines
  • Slides
  • Seals
  • Pumps
  • Assembly of all agricultural machinery

Industry

  • Slides and guides
  • Cables and pulleys
  • Railway points
  • Bushes and pins
  • Hinges of all types
  • Camshaft lobes
  • Threads
  • Splines
  • Sewing machines
  • Machine assembly
  • Assembly lubricant, particularly where subsequent lubrication is difficult

Typical Properties

Tests ASTM Nulon L90
Colour   Cream
Flash point, COC, °C D92 194
Foam characteristics D892 Nil
Viscosity @ 40°C, cSt D445 452
Viscosity @ 100°C, cSt D445 000
Viscosity index D2270 1A
Density K/l D1298 0.9476
Pour point °C D97 -18
Melt point of PTFE °C D1457 >325

How our customers rate this product.

Average rating of 5/5

1 customer review

5 Star
  1
100%
4 Star
 0
0%
3 Star
 0
0%
2 Star
 0
0%
1 Star
 0
0%

Most Helpful Customer Reviews

08 Apr 2020 AdrianT By AdrianT
In the overhaul and rebuild of the starter motor from my 2007 Toyota Prado D4D, I used this grease for the bearings and gears. It's a great long term grease for something like this that won't get pulled apart again for another 300,000+ kilometres. (car has done over 370,000 km - various Nulon products are keeping it going)
Was this review helpful to you?     Yes No

FAQs

Related Questions


Can't find an answer to your Question?