The Extreme Performance Grease to use where others fail. L80 is a blend of Polytetrafluoroethylene (PTFE) fluorocarbon particles in a specially prepared lithium-based, water-repellent grease. L80 can be used in almost any greasing application to improve lubrication and reduce temperature and wear.
L80 keeps water and dust out while a plating of PTFE is applied to the mating surfaces under working conditions. Seal performance is improved and operating temperature reduced, resulting in less grease "throw". L80 is applicable to the majority of situations specifying grease lubrication, especially in high pressure, water and salt-water conditions including wire ropes.
L80 has a continuous temperature operating range of -9°C to 150°C.
L80 provides a residual lubrication, which is added insurance, combined with savings through less wear and downtime, making it an economical benefit. Smoother running, increased efficiency and prolonged machinery life, less labour and less volume of lubricant, all indicate higher profits. Where L80 has been used on a continuous basis, seizing and pitting will not occur on the friction surfaces.
The grease to use where others fail!
The list below is only indicative of the applications of L80 grease.
|Universal joints||Sump and bilge pumps||Cables|
|Wheel bearings||Deck winches||Bearings|
|Leaf springs||Trawl ropes||Bushings|
|King pins||Boat trailer bearings||Guides|
|Tow balls||Stern tube bearings||Valves|
|Water pumps||Propeller shafts||Slides|
|Clutch release bearings||Rudderpost bearings||Mining equipment|
|Soap Type||Lithium 12
|Penetration @ 25°C||D217|
|Worked, 60 strokes||D217||275|
|Dropping Point °C||D2265||190|
|Penetration change %||+12|
|Leakage, wheel bearing||D1263|
|65g packed, 163°C g||1g|
|Water washout @ 80°C %||D1264||3.5|
|24 hours @ 25°C kPa||2|
|Pressure drop @
100 hour kPa
|Pressure drop @
500 hour kPa
bearing N° 204
|Rust prevention rating||D1743||1|
|Timken OK load, kg||D2509||23|
|4 Ball EP test||D2596|
|Load wear index||40|
|Weld point, kg||290|
|4 Ball wear test, 40 kg, 1 hour||D2266|
|1200 rpm @ 75°C
|Ball joint test||D3428|
|Base oil, cst @ 40°C||D445||143|
|Base oil, cst @ 100°C||D445||14|
Nulon Extreme Performance Grease is suitable for use in boat trailer wheel bearings.
Yes, Nulon Extreme Performance Grease is suitable for use in CV joints. It is recommended to remove all old grease from the joint before packing with Nulon L80.