Full Synthetic 80W-140 Heavy Duty Limited Slip Differential Oil

Download MSDS Download Product Bulletin
Full Synthetic 80W-140 Heavy Duty Limited Slip Differential Oil - SYN80W140-20

Full Synthetic 80W-140 Heavy Duty Limited Slip Differential Oil

Nulon Full Synthetic 80W-140 Heavy Duty Limited Slip Differential Oil (SYN80W140) is an API GL-5 / GL-6 (obsolete) and API MT-1 limited slip and conventional differential oil with superior high temperature stability when compared to mineral differential gear oils. It is the preferred substitute for SAE 85W-140. Ideal for use in vehicles operating under heavy duty conditions such as: 4x4, towing, racing or carrying heavy loads.

Nulon SYN80W140 is formulated using hydrofinished base oils with superior additive packages to enhance wear protection, corrosion protection, and low temperature characteristics. The optimized formulation has maximum oxidation and thermal stability to ensure fluid durability and performance during its life time.

The hydrofinished base oils used in SYN80W140 are Very High Viscosity Index (VHVI) base fluids that have advantages of low volatility for better oil consumption, low wax content for improved low temperature fluidity, high saturates level for excellent thermal and oxidation stability, and low sulphur and aromatic compounds for improved environmental outcomes.

Nulon SYN80W140 is ideal for Ford and Holden limited slip differentials because it contains the required Sturaco 7098/ Ford R178 limited slip additive. When using this product there is no need to use additional Sturaco 7098 or Ford R178 limited slip additive.

Benefits

  • Outstanding oxidation and thermal stability
  • Superior seal compatibility to protect oil seal deterioration
  • Contains limited slip additive. No additional Sturaco 7098 or Ford R178 required
  • Fortified using extreme pressure additive technology to provide excellent protection by reducing wear between gear teeth during high load and shock load operating conditions.
  • Can be used in conventional differentials (non LSD)
  • High film strength to tolerate high loads
  • Reduces clutch chatter (also known as judder)
  • Excellent corrosion protection and rust resistance for differential component durability

Applications

  • Ford and Holden limited slip differentials
  • 4x4, racing, towing or carrying heavy loads
  • Limited slip differentials that requires API GL-5 or GL-6 (obsolete) performance

Typical Characteristics

Typical Characteristics SYN80W140
SAE Viscosity Grade 80W-140
KV @ 100°C, cSt 29.00
KV @ 40°C, cSt 222.0
Viscosity Index 170
Density @ 15°C, g/mL 0.8939
Pour Point, °C -30

Due to continued product research and development, the information contained in this Product Bulletin is subject to change without notification

Safety

Avoid prolonged skin contact with used oils. Wear suitable gloves. If skin contact occurs wash immediately with soap and water. Prolonged and repeated contact with used oils may cause skin cancer. Protect the environment. Do not pollute drains, ground or water with used oils. Dispose of container as per local EPA guidelines. Do not use this container for fuel or solvents.

Pack Sizes

SYN80W140-20

20 litres
Single Unit
Barcode: 9311090003095

SYN80W140-4

4 Litres
3 Per Carton
Barcode: 9311090002456

SYN80W140-2.5

2.5 Litres
6 Per Carton
Barcode: 9311090004054

SYN80W140-1

1 Litre
6 Per Carton
Barcode: 9311090002135