Pro-Strength Mass Airflow Sensor Cleaner (MAFC300)

Download MSDS Download Product Bulletin
Pro-Strength Mass Airflow Sensor Cleaner (MAFC300) - MAFC300

Pro-Strength Mass Airflow Sensor Cleaner (MAFC300)

Nulon Pro-Strength Mass Airflow Sensor Cleaner is formulated to remove dust, pollen, soot and oils that compromise engine performance by affecting airflow readings from the sensor.


  • Increases power
  • Reduces rough idling
  • Improves fuel economy
  • Plastic safe
  • Residue free

Directions for Use

Directions for Use
Always use at room temperature ensuring proper ventilation.
  1. Use each time you service the vehicles air filter
  2. Disconnect sensor and remove from air duct
  3. Spray sensor hot wire/plate with 10 to 15 spurts to dislodge contaminants.
  4. Allow sensor to dry completely
  5. Reassemble sensor into air duct and reconnect to electrical system


CAUTION: Keep away from heat/sparks/open flames/hot surfaces.  Do not smoke when using product. Pressurised container: do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Avoid breathing spray. Wear protective gloves/eye protection. Use only outdoors or in a well-ventilated area.

Pack Sizes


300 ml
6 Per Carton
Barcode: 9311090005297