Pro-Strength Semi-Synthetic 10W-40 High Performance Engine Oil

Download MSDS Download Product Bulletin
Pro-Strength Semi-Synthetic 10W-40 High Performance Engine Oil - SEM10W40-205

Pro-Strength Semi-Synthetic 10W-40 High Performance Engine Oil

Semi-synthetic formula designed for Australian, Japanese, US and European high performance non-turbocharged and turbocharged petrol engines.

Typical Characteristics

SAE Viscosity Grade 10W-40
Viscosity @ 100°C (cSt)  ASTM D445 15.08
Viscosity @ 40°C (cSt)  ASTM D445 106.6
Apparent Viscosity by CCS @ -25°C (cP) ASTM D5293 6141
Apparent Viscosity by MRV @ -30°C (cP) ASTM D4684 29400
Viscosity Index  ASTM D2270 148
Density @ 15°C (kg/L)  ASTM D4052 0.8687
Sulphated Ash (mass %)  ASTM D874 1.1
Total Base Number (mg KOH/g)  ASTM D2896 11
Flash Point (°C)  ASTM D92 216

Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification.

Safety / Caution

NOTE: Not suitable for vehicles fitted with Diesel Particulate Filters (DPF). Refer to your vehicle service manual for correct lubricant requirements and service intervals.

CAUTION:  Avoid skin contact with used oil. Wear suitable gloves. If skin contact occurs, wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect the environment. Do not pollute drains, ground or water with used oil. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.

Pack Sizes

SEM10W40-205

205 Litre Drum
Single Unit
Barcode: