• Contains advanced long life inhibitor technology for maximum corrosion protection
• Glycol-free concentrate promoting quicker heat reduction over conventional coolant
• Protects aluminium, steel, cast iron, solder, copper and brass
• Safe for all hoses, gaskets and seals

DIRECTIONS FOR USE: Refer to the owner’s manual for cooling system capacity. For optimal results use Nulon Radiator Flush to remove harmful rust and mineral scale residue before using this product. If the system is clean, ensure the engine is switched off, turn the heater on and drain the old coolant (when cool) by removing the drain plug or bottom radiator hose. Replace drain plug or bottom radiator hose. Add Nulon Ultra Cool to the radiator first then top-up with clean, soft or demineralised water. (makes up to 10 Litres) Check the coolant level is correct when system is cool.

SAFETY: Harmful if swallowed. May cause respiratory irritation. Use personal protective equipment as required.

FIRST AID: Immediately call a POISON CENTER or doctor/physician. Do NOT induce vomiting. Rinse mouth with water. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. For advice, contact a Poisons Information Centre (e.g. phone Australia 13 11 26; New Zealand 0800 764 766) or a doctor (at once).

ENVIRONMENT: Do not pollute drains, soil or water with used products. After use, dispose of container in a responsible manner. Disposal of container should comply with local council regulations.