DOT 4 Full Synthetic Brake Fluid
Nulon DOT 4 Full Synthetic Brake Fluid is formulated to provide maximum braking efficiency and safety. USE WHERE A DOT 4 BRAKE FLUID IS SPECIFIED.
BENEFITS:
- Reduces brake fade and soft pedal feel under extreme braking conditions
- DERBP 260˚C/500˚C min
- WERBP 155˚C min
- Low moisture absorption formula for maximum performance
- Brake fluid colour: clear/amber. Can be mixed with any colour DOT 4 brake fluid
- Contains corrosion inhibitor for increased component life
Pack sizes
Nulon DOT 4 Full Synthetic Brake Fluid is formulated to provide maximum braking efficiency and safety. USE WHERE A DOT 4 BRAKE FLUID IS SPECIFIED.
The vehicle manufacturer’s recommendations are to be adhered to when using NULON FULL SYNTHETIC DOT 4 BRAKE FLUID. NULON FULL SYNTHETIC DOT 4 BRAKE FLUID must not be used in brake or hydraulic systems in which the use of mineral- or silicone-based fluids (e.g. LHM or DOT 5) is specified. It is suitable for all disc, drum, anti-skid ABS braking and electronic stability control systems used in standard to high performance vehicles with high thermal load around the braking system.
NULON FULL SYNTHETIC DOT 4 BRAKE FLUID is compatible with all metals and rubber seals typically used in automotive braking systems. It is intended for use both as initial fill and in after care markets. NULON FULL SYNTHETIC DOT 4 BRAKE FLUID is miscible and compatible with conventional brake fluids of the same technology or specifications. In order to fully exhaust the benefits offered by NULON FULL SYNTHETIC DOT 4 BRAKE FLUID, mixing with other products is to be avoided and a complete changeover to NULON FULL SYNTHETIC DOT 4 BRAKE FLUID is recommended.
Exceeds the following international and national standards and specifications:
- FMVSS No.116 (DOT 4)
- ISO 4925-Class 4
- AS 1960.1-2005-Class 2
- SAE J1704 (borate ester brake fluids)
- Nissan NES-M5055
- Continental ATE N55311.05
NOTE: Always follow vehicle manufacturer’s directions and specification. Ensure master cylinder and reservoir caps are clean to reduce contamination of the brake fluid. Replace brake fluid every 24 months.
DANGER
Harmful if swallowed. Causes serious eye damage.
CONTAINS: 2-[2-(2-butoxyethoxy)ethoxy]ethanol 65-80%
SAFETY: Wash hands, face and all exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Use personal protective equipment as required.
FIRST AID: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. IF IN EYES: Rinse cautiously with water
for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. For advice, contact a Poisons Information Centre (e.g. phone Australia 13 11 26; New Zealand 0800 764 766) or a doctor (at once).
ENVIRONMENT: Do not pollute drains, soil or water with used products. After use, dispose of container in a responsible manner. Disposal of container should comply with local council regulations.
Typical Characteristics
Density at 20°C | DIN 51757 | 1.04 g/ml |
Dynamic Viscosity at -40°C | SAE J1703/J1704 | ≤1,400 mm²/s |
Dry Boiling Point | SAE J1703/J1704 | ≥260 °C |
Wet Boiling Point | SAE J1703/J1704 | ≥155 °C |
Product coloring | DIN 10964 | none |